marobas.com

Posts Tagged ‘surface’

Maintenance and cleaning of leather upholstery is very simple compared to velvet. In fact, cleaning is not long and is very compact and does not require many hours of drying methods, such as velvet. The steps of:First, prepare in advance of the supporting tools, such as plastic dry chamois, towel, brush and vacuum cleaner. To stain drugs and cleaning products are available in shops or supermarkets.Find a cleaner that can remove various stains form. However, determining the ink stain and extra hard work.Second Intake grille, clean room and pull the chair with remote hands. Then pressed clean plastic chair with a pad, which according to taste, and wipe the surface of the seat.Third Spray the medication into the area to be cleared and the distribution in the cleaning industry to avoid drugs. Because dry than the drug used for cleaning waste means.Fourth brush the surface was in the direction of the injected drugs, and in order to prevent the dirt back. For stubborn stains can be shifted several times, need not be pressed too hard to avoid, reduce the surface of the skin with these drugs.5th Once brushed, rubbed quickly (not dry drugs) to make cleaning easier. Do a sweep direction.

Layer made of velvet car seat will make the car an elegant impression. But take care that uses a layer of velvet seats must be extra careful, because the material is quite difficult to clean.To clean, first provided support tools such as brush, wipe clean, stain remover or cleaning fluid velvet that can be bought in supermarkets or car accessories shop and vacuum cleaner (vacuum suction).The first step, small dirt suction on the sidelines and the seat surface with vacuum suction. After it spray the cleaning liquid in the form of foam to the surface to be cleaned. Immediately brush the part that has been sprayed with a way to avoid the dirt back to the places that have been brushed. Perform a partial or parts.For stubborn stains enough, to be repeated several times until clean.However, not all stains can be removed with liquid.After brushing, the surface is rubbed with a clean cloth immediately.The last step is the process of cleaning upholstery. But you cannot just enjoy it. . It should be dried in the sun to dry first. Ideally, the seat is removed and dried in the sun.However, if reluctant, you can open all the doors. This is done to avoid the smell.

The job is to cool the radiator; the vehicle is running while the engine and piston pump. The heat of the engine radiator can prevent cracks. The cooler also has passages with the Finn, who retains the heat of the coolant and prevents heat from the engine compartment. Hot coolant circulates through the radiator is cold, the engine much cooler with heat transfer.All components of the cooling system must be in a better condition for the process required to cool the vehicle. This is important because there are many components of the cooling system such as seals, tubes, chains, fans, water pump, radiator, and coolant, which must be checked and maintained. If part of the system is broken or not working, the engine may crack or melt. It is causing serious damage or non-functional. Periodically check the coolant; please explain whether the system is working properly. Only the level of coolant when the engine is off and cool, with a flat surface and looking into the filter by removing the radiator. If the vehicle is not cold, when the coolant level is activated, a hot liquid can burn and steal neighborhood was. Infiltration pipes and arms are swollen or porous proof. Replace bad hoses immediately and control of heating pipes, and because if the system is not waterproof, cannot maintain the correct pressure, the flow of coolant.Flushing the coolant periodically as recommended by the vehicle is the key to a radiator in good health. Old coolant is corrosive and can damage or destroy the cooler, which replaces it. If the radiator for too long and regular maintenance is neglected, is not confirmed, the engine overheated and very hot. This can cause severe damage and require emergency travel expensive for auto mechanics and maybe a new engine.